AudioCodes MediaPack 118 Analog VoIP Gateway 8 FXO Ports (MP118-8O-SI

AudioCodes MediaPack 118 Analog VoIP Gateway 8 FXO Ports (MP118-8O-SIP) The AudioCodes MP118-8O-SIP is an analog VoIP Gateway which is a cost-effective, best-of-breed technology product. These stand-alone analog VoIP Gateways provide superior voice technology for connecting legacy telephones, fax machines and PBX systems with IP-based telephony networks, as well as for integration with IP PBX systems. AudioCodes MP118-8O-SIP Key Features 8 FXO ports T.38 fax compliant 3-way conference with local mixing Call pickup Hunt groups Call forwarding Call hold Call transfer Advanced telephony features such as long-haul, metering tones generation, country dependent MWI and Caller ID for true integration with the existing telephony infrastructure AudioCodes MP118-8O-SIP Technical Specifications Interfaces Analog Signaling: 8 ports, FXS, FXO loop-start Network Interface: 10-100 BASE-T, RJ-45 Media Capabilities Voice Coders: G.711 (A-law and µ-law), G.723.1, G.726, G.727, G.729A-B, G.722 VoIP Features: G.168-2004 echo cancellation, silence detection and comfort noise generation, dynamic programmable jitter buffer Call Progress Tones: Programmable detection and generation tones, pre-recorded tones generation DTMF: In-band and out-of-band signaling, RFC 2833, SIP INFO-NOTIFY Fax Over IP: Group 3-super G3 fax over IP, T.38 relay, automatic switching to G.711 IP Networking and Telephony Protocols VLAN: 802.1 p-Q VLAN tagging IP Transport: IPV4-IPV6*, DiffServ, TOS Control Protocols: SIP (RFC 3261) over UDP, TCP and TLS (1.2) Media Protocols: RTP (RFC 3550), SRTP (RFC 3711), RTCP (RFC 3550), RTCP-XR (RFC 3611) Management Protocols OAM&P: - Web GUI, SSH-Telnet, SNMP v2-v3, INI file - AudioCodes’ One Voice Operation Center - User authentication and access control via RADIUS Automatic Configuration: - Zero-touch provisioning - Configuration-firmware download via HTTP(s), FTP and TFTP - DHCP-based provisioning - options 66, 67 and 160 - VLAN ID discovery using LLDP Voice Menu: Basic configuration using standard touch-tone phone (MP-11x only) Survivability During Network Failure PSTN Fallback: PSTN fallback upon power failure, IP connection failure, customer-defined IP QoS thresholds (MP-114 and MP-118) Survivability: Stand Alone Survivability (SAS) for 25 SIP users Analog Telephony Features 3-Way Conference: On-board 3-way conference MWI: Message Waiting Indication: High (neon) and low (LED) voltage, FSK, stutter dial tone Caller ID: Bellcore GR-30-CORE Type 1 using Bell 202 FSK modulation, ETSI Type 1, NTT, Denmark, India, Brazil, United Kingdom and DTMF ETSI CID (ETS 300-659-1) Polarity Reversal-Wink: Immediate or smooth to prevent erroneous ringing Metering Tones: 12-16 KHz sinusoidal bursts, generation on FXS Distinctive Ringing: By frequency (15-100 Hz) and cadence patterns Subscriber Line Interface Ring Voltage: Sine: 54 VRMS typical (balanced ringing only) Ring Frequency: 25-100Hz Maximum Ringer Load: REN3 Loop Impedance: Up to 1,500 ohm for the MP-11x, up to 1,600 ohm for the MP-124 (including phone impedance) Line Current: Up to 32 MA on 4 ports Physical Power: 100-240 V AC-50-60 Hz Environmental: - Operational: 5 to 40°C (41 to 104°F) - Storage: -25 to 85°C (-13 to 185°F) - Humidity: 10 to 90percent non-condensing Dimensions: 42x172x220 mm Mounting: Table top, wall mount, rack mount (with an optional shelf) Weight: MP-1xx: 0.5 kg (1.1 lbs.) approx.