Timbabuild 2 part EWS Wood Stabiliser Primer 300ml

Chemfix Timbabuild Starter Kit \nTimbabuild Epoxy Wood Stabiliser is a specially designed two-part low viscosity, solvent free, resin primer which is designed to strengthen weakened wood fibres by penetrating deep into the wood. \n \nOnce the damaged, decayed and discoloured wood has been removed by use of a suitable cutter tool such as a router or chisel, then the area to be treated is lightly sanded to ensure excellent adhesion. The moisture content of the wood should be no greater than 18% (check using a standard moisture meter) and damp wood should be allowed to dry naturally, or by way of a hot air gun. The two components are mixed manually into a separate container, and thoroughly agitated for one minute. The 2:1 mixing ratio should be strictly observed. EWS should be applied using a standard brush and left to cure for at least 20 minutes. \nKey benefits: \nSolvent Free - suitable for indoors and outdoors \n Excellent Penetration due to the Low Viscosity \n Pre-measured to Volume 2:1 ratio to ensure accurate mix \n High Strength & Durability \n Fast and Simple to Use, Easy to Clean and Store \n Used with both the ERC10 & EHB60 systems \n \n