Bond It BDHA6 - HA6 RTV Silicone Sealant Marine Approved

HA6 is a high quality, non‐shrinking, marine quality, automotive silicone sealant. Surpasses the requirements of EN15651‐1,2:2012. UsesHA6 is unaffected by UV, ozone, salt water immersion and extremes of temperature and is non-slumping in paste form.HA6 contains no fungicides or oils which may leach into water and is therefore recommended for bonding, bedding and sealing glass in aquarium construction. HA6 is also recommended for the manufacture of in-situ gaskets and seals for pumps and pipework to prevent water ingression and as a dust and weatherproofing seal for cabinets in dirty environments or external applications.It is ideal for use on: glass; ceramics; anodised aluminium; primed metals and timber and many plastics.PreparationEnsure all surfaces are clean, dry and free from grease, oil or any other contaminants that may hinder adhesion. Prime porous surfaces and metals other than anodised aluminium or stainless steel for optimum adhesion.ApplicationApply using a standard sealant gun with the nozzle cut at an angle of 45°, and to an opening slightly larger than the joint to be sealed.For sealing and bedding apply in the normal fashion and tool to a smooth finish one or two minutes after gunning. As an adhesive bring the two surfaces together before skinning commences and do not stress the joint before the silicone has developed strength. As a gasket apply to one surface and if the joint is to be broken allow a strong skin to develop before compressing for permanent gaskets the joint can be sealed immediately. Clean away any excess with white spirit.When using in aquarium assembly please refer to separate sheet for instructions which can be supplied upon request.LimitationsNot suitable for use on bitumen, asphalt, natural stone or unprimed metals.Do not use as a mirror adhesive,Do not apply at temperatures below 5C or above 30C.ColourHA6 comes in 4 colours: white, translucent, black and grey.Container Size310ml plastic cartridge.Shelf Life24 months from date of manufacture when stored in original unopened cartridges.Storage ConditionsStore in cool, dry conditions at a temperature between 5 and 25 C.Disposal of ContainersDo not leave empty containers where residue could be harmful to children, animals or the environment. Remove any containers to a central disposal point in accordance with local regulations.Health & SafetyPlease refer to separate material safety data sheet for fullhandling, use and storage instructions (available on request).Keep out of reach of children. It is the users responsibility to determine suitability for use. If in doubt contact our Technical Department for advice.Note: this information is for general guidance only, since site conditions and labour are beyond our control. It is recommended that users make their own tests to determine suitability. Specification SummaryFlammability Non-flammableTooling Time 5-10 minutesTack Free 10-20 minutesFull Cure 3mm depth per dayApplication Temperature +5o C to +30o CRubber Hardness Shore A: <25Maximum Extensibility 300%Joint Movement Capability 25% by ISO methodsService Temperature Limits -60o C to +180oC. Short periods over200o C are not detrimental to sealant performance